pe pp pvc single wall plastic corrugation pipe production machine
1. We not only provide machines but also offer technical guide and market evaluate.
2. We will provide all the machines for the complete production according to customer's requirements.
3. We will provide complete service for factory layout and other information to help customer to build the factory.
4. We will provide good service for machine installation and training, until the customers can run the machines and make stably production.
5. Except one year quality guarantee, we will provide after-sell service for all the life.
Features of product:
1.Plastic single-wall corrugated pipes have features of high temperature resistance, resistant to corrosion and abrasion, high intensity, good flexibility, etc.
2.Molding corrugation pipe with smooth inside and outside surface,and even ripple at one time by corresponding die
Product Application:
1.The production line is suitable for producing small diameter single wall bellows with PP and PE raw materials. It can continuously produce polyethylene, polypropylene, polyvinyl chloride, Eva and other bellows and PA bellows.
2.It is used as wire and cable to wear pipe, washing machine drainage pipe, vacuum cleaner pipe and ventilator
3.It is widely used in automobile wire, electric wire pipe, machine tool circuit, lamp wire protection tube, air conditioner, washing machine and so on.
Process line:
Raw material + master batches→mixing→vacuum feeding →material dryness →single screw extruder→extrusion mould→corrugation forming machine→meter measurer→double winder→finished product inspecting &packing
Single wall high speed corrugated pipe forming machine can produce two diameters or three diameters single wall corrugated pipe in the same mould blocks, which reduce the cost of the moulds and time for changing the mould blocks, increase the efficiency.
This kind of pipe is high temperature resistance, anti-erosion, anti-abrasion and with high strength, the pipe can be used as oil pipe in automobile braking system, and for high temperature egas, chemical liquid transferring.
Technical Parameter :
| Pipe diameter |
8-32mm |
16-75mm |
| Main Extruder model |
SJ50 |
SJ65 |
| Main Extruder L/D |
25:1/28:1/30:1 |
25:1/28:1/30:1 |
| Capacity |
30-50kg/h |
60-80kg/h |
| Main Motor |
11KW/15KW |
18.5KW/22KW |
| Cooling type |
Air fans cooling |
Air fans cooling |
| Forming mould quantity |
50 paris |
60 pairs |
| Production Speed |
8-12m/min |
8-15m/min |
| Forming machine motor |
1.5kw |
1.5kw |
){kind=link}